Table 3.1
Pic. 3.1a. Sectional view and tightening torques, Nm:
1 - Nut of the tension roller of the timing mechanism drive: tightening torque 50 Nm;
2 - Bolt and nut M6: tightening torque 10 Nm (bolt M8: tightening torque 22 Nm);
3 - Pre-tightening with a torque of 20 Nm, then tightening by an angle of 68±6°.
Pic. 3.1. Sectional view and tightening torques, Nm:
* pre-tighten with a torque of 25 Nm, then tighten them by an angle of 43±6°;
** see chapter «Maintenance».
Pic. 3.1c. Sectional view and tightening torques, Nm