Removal
- Open the corresponding door
Pic. 13.10. Removing the front door trim: 2 - door trim fastening screw; 5 - screw located under the switch bracket
Front door
- Remove the screw (1, Fig. 13 11) switch bracket fasteners and disconnect the wiring harness
Pic. 13.11. Removing the front door trim: 1 - screw for fastening the switch bracket; 2 - door pocket fastening screw. 3 - internal decorative triangular overlay; 4 - screw located in the air supply channel
- Remove the speaker grille.
- Remove the screws (2) fastening the front door pocket The front door pocket is an integral part of the front door trim.
- Remove the inner decorative triangular trim by first detaching the back of the trim.
- Remove the cover and remove the screw located in the air supply duct.
- Remove the screw located under the switch bracket.
- Use a flat tool to separate the door trim from the door.
- Disconnect the rod from the inside door handle.
- Remove the door trim and disconnect the electrical connector from the speaker.
Backdoor
- Remove the window handle.
- Remove the screw securing the armrest.
- Remove the decorative trim of the door handle.
- Remove the speaker grille.
- Remove the screws securing the rear door pocket. The front door pocket is an integral part of the rear door trim.
- Use a flat tool to separate the door trim from the door.
- Remove the door trim and disconnect the electrical connector from the speaker.
Installation
- Installation is carried out in the reverse order of removal.
Pic. 13.12. Door trim:1 - rear door trim; 2 - rear door pocket; 3 - sun curtain; 4 - front door trim; 5 - front door pocket; 6 - speaker grille; 7 - decorative overlay; 8 - front door opening handle with switches; 9 - rear door opening handle
Pic. 13.13. Removing the rear door trim: 1 - window lifter handle; 2 - armrest; 3 - decorative trim for the door lock opening handle; 4 - door pocket fastening screws