Rear bumper components (hatchback)
Removing
Remove the rear lights.
Loosen the top bolts A (torx T20).
Remove the three lower holders B (plastic rivets).
Loosen the fixing screws C (torx T20).
Loosen the two side mounting bolts D (torx T20).
Remove side brackets E (plastic rivets).
Detach the bumper from the rear fender guards.
Disconnect the license plate light and parking system power connector (if installed).
Pull the bumper towards you and remove it (together with an assistant).
Installation
(together with an assistant)
Apply sealant (Warehouse №77.11.170.230) around the top anchor point F.
Check up reliability of fastening of the shock-absorber.