Install the cylinder head.
Tighten the cylinder head bolts.
Refill the hydraulic lifters, as the hydraulic fluid may leak from the lifters if they are not used for a long time.
To check for refilling, press the top of the plunger (1) with your thumb.
If the pusher plunger is recessed:
- immerse the pushers in a container with diesel fuel;
- then install the pushers.
Install:
- rocker arms;
- camshafts, lubricating the bearing journals with engine oil.
Turn the camshafts so that the grooves on their ends are horizontal and below the shaft axes.
Caution: Do not allow oil to come into contact with the mating surfaces of the cylinder head cover.
Apply LOCTITE 518 to the cylinder head cover mating surface with a paint roller until it turns a reddish color.
Use a cloth to remove any LOCTITE 518 that has come into contact with the camshaft bearing supports in the cylinder head cover.
Remove the cylinder head cover.