Remove:
- partially tailgate seal;
- rear wheels;
- rear mudguards;
- rear lights on the wings.
Remove the buffers (1) and holders (2).
Unscrew the lower mounting bolts (5).
Partially detach the side extensions of the rear bumper.
Disconnect the side extensions of the rear bumper by pressing the clips with a flat-blade screwdriver. Unscrew the side mounting bolts (6).
 |
 |
Unscrew the side bolts (7). Disconnect the rear bumper from the mounting holders (8).
 |
 |
Partially remove the rear bumper (the operation is performed by two people with an assistant).
Disconnect the rear bumper wiring harness connector.
Remove the rear bumper (the operation is performed by two people with an assistant).
Disassembling the rear bumper
Remove the rear bumper wiring.
Remove the license plate lights.
Remove the rear fog lights (if installed).
Remove the obstacle detection sensors (if installed).
Loosen the screws (4) and remove the muffler outlet pipe bracket.
Disconnect the exhaust manifold trim by pressing on the clips.
Loosen the screws.
Remove the lower decorative trim from the rear bumper.
(Original publication on the portal: renaultbook.ru)
Remove the lower part of the rear bumper.
Install all parts in reverse order.