- upholstery of the rear side door;
- door seals.
Remove the rear speaker.
Remove the glass from the rear side door.
Loosen the screws (4) and remove the rear door pillar outer trim.
Replace the parts included in the soundproofing foam kit. Install the rear door pillar lower outer trim.
Establish the top part of a flute of glass of a back door.
Install the rear door pillar outer trim over the top of the rear door glass groove.
Install the center bolt (14), while holding the front door outer trim in place, then install the upper (15) and bottom bolts (13).
Note. If the outer trim of the rear door pillar is skewed relative to the front door, adhesive pads can be glued to the brackets of the outer trim of the rear door pillar to compensate. To perform this operation, it is necessary to remove the outer decorative trim again.