- external rear-view mirror;
- outer window sill seal of the front door;
- upholstery of the front door;
- door sealing film;
- front door glass.
Partially remove the front door glass guide groove at the point (1).
Note. When removing the front door pillar outer trim, be careful not to damage the part.
Loosen the screws (3) and remove the front door pillar outer trim.
Replace the parts included in the sound deadening foam kit. Install the front door pillar lower outer trim.
Install the top of the front door glass groove.
Install the front door pillar outer trim over the top of the glass groove.
Install the center bolt (6), while holding the front door outer trim in place, then install the upper (7) and bottom bolts (8).
Note. If the outer trim of the front door pillar is skewed relative to the rear door, adhesive pads can be glued to the brackets of the outer trim of the front door pillar to compensate. To perform this operation, it is necessary to remove the outer decorative trim again.