Remove the front wheels.
Remove the wheel arch screens.
Remove the upper air duct (1).
Disconnect the bumper wiring harness connector (2).
Unscrew the lower bolts (3).
Unscrew the side bolts (4).
Unscrew the upper bolts (5).
Disconnect the side parts of the front bumper at point (6) using levers (Car. 1363).
Lift the front of the front bumper slightly.
 |
 |
 |
 |
 |
 |
Disconnect the headlight washer lines.
Remove the front bumper (the operation is performed by two people with an assistant).
Install the front bumper by moving it correctly along the guides.
Disassembling the front bumper
Remove the screws (1) and decorative trims (2).
Remove the headlight washer jets.
Disconnect the connector (3) of the central obstacle detection sensor.
Disconnect the central obstacle detection sensor (4) fasteners from the front bumper.
Disconnect the central obstacle detection sensor by pressing the latches (5).
Disconnect the connector (6) of the side obstacle detection sensor.
Detach the side obstacle detection sensor by pressing the latches (7).
Remove the front bumper wiring.
Drill out the rivets (3).
Disconnect the air deflector (4) from the mount.
Cut off the holders (5).
Disconnect the aerodynamic element (6).
Remove the front bumper inserts (7).
Disconnect the central grille (8) from the mount.
Remove the logo.
Replace the front bumper rivets and fasteners.
 |
 |
Front Bumper Guide Bracket
Remove the screws (1) and the front bumper bracket.
(You can find the original at this link: www.RENAULTBOOK.ru)