Disconnect the battery gas pipe at the connecting rod of the radiator installation bracket.
Loosen the mounting bolts (1) connecting rods of the bracket for installing the radiator.
Loosen the mounting bolts (2) bracket for mounting the radiator on the front panel.
Place a hydraulic jack under the radiator mounting bracket.
Loosen the mounting bolts (3) bracket for mounting the radiator on the spars.
Disconnect the electric fan wiring harness (4) from the radiator mounting bracket.
Remove the radiator mounting bracket.
Clean the mating surfaces of the radiator mounting bracket and the lower mounting bolts with a surface cleaner. When installing, tighten the bolts of the bracket for mounting the radiator on the side members to the required torque 180 Nm.
Check clearance (X) between the radiator bracket and subframe.
The gap must be within 13±1 mm.