Removing
Removal of the heater radiator is carried out after dismantling the air blower, instrument panel and air distribution unit.
In the engine compartment
1. Pinch the heater hoses with pliers, disconnect the quick-release hose clamps of the heater hoses.
2. Install the baffle and remove the remaining fluid by blowing compressed air.
3. Turn out a bolt of a bracket of fastening of hoses of a heater on a bulkhead panel.
Inside the cabin
4. Wring out four spring latches E and remove a radiator.
Installation
Installation is carried out in the reverse order of removal.
If the spring clips are broken, use two bolts F to fasten the heat sink to the air distribution unit body.