Attention! When removing and installing the fuel tank, do not smoke or approach the work area with hot objects.
Lift the rear seat cushion and remove the plastic access cover to the fuel pump and level sensor assembly.
Disconnect quick-release coupling 1 and connect a hose to outlet C that is long enough to lower its end into a container outside the vehicle.
Note: INTERCO air-powered transfer pump can also be used.
In the engine compartment, remove the fuel pump relay, installed in the junction box in the engine compartment (Relay A for K4, F4 and F5 engines. Relay B for L7 engine).
Connect contacts 3 and 5 with a jumper and drain the gasoline until it starts to flow out intermittently.
Remove the jumper Replace the relay Disconnect the battery.