Removing
Turn on the ignition.
Attention! To ensure the correct trajectory of the wiper arms, it is necessary to initialize the wiper motor.
Turn the wiper switch from position (0) into position (1), then from the position (1) into position (0).
Switch off the ignition.
Mark the position of the levers (3). Fold the nut caps (4).
Loosen the nuts (8) windshield wiper arms.
Remove the wiper arms using the tool.
Installation
Turn on the ignition.
Attention! To ensure the correct trajectory of the wiper arms, it is necessary to initialize the wiper motor.
Turn the wiper switch from position (0) into position (1), then from the position (1) into position (0).
Switch off the ignition.
Install:
- wiper arms according to the marks made during removal,
- wiper arm nuts.
Torque tighten the wiper arm nuts (16 Nm).
Install the nut caps.