Removing
Set the wheels to straight ahead.
Lock the airbag computer.
Disconnect the battery.
Remove the steering column switch block.
Remove:
- fastening screws (1) wiper switch lever,
- fastening screws (2) switch lever for direction indicators and headlights.
Installation
Make sure the contact disk tape is centered (2.5 turns each way).
Make sure the wheels are in the straight ahead position.
Install:
- screws securing the outdoor lighting switch lever and direction indicators and headlights,
- windshield wiper lever mounting screws.
Establish the block of understeering switches.
Connect the battery.
Unlock the airbag computer.
Check after repair
Turn on the ignition.
Check the operation of the contact disk:
- turn the steering wheel to the extreme left position,
- turn the steering wheel to the extreme right position,
- return the steering wheel to the center position,
- check that there is no error message displayed on the instrument panel.