Removing
1. Remove the door upholstery.
2. Remove the inner side impact converter.
3. Unscrew the three bolts A of the anti-theft alarm cover using a T3O screwdriver (see illustration).
20.3 Unscrew the three bolts.A of the anti-theft alarm cover using a T3O screwdriver
4. Remove the block cover of the anti-theft alarm (see illustration).
20.4 Remove cover B of the anti-theft alarm unit
5. Turn the sleep stopper a quarter of a turn and remove the switch (cylinder) castle (see illustration).
20.5 Turn stopper C a quarter of a turn and remove the switch (cylinder) castle
6. Disconnect the rod B from the outer handle (see illustration).
20.6 Disconnect link B from the outer handle
7. Disconnect the rod A of the lock release button from the lock by retracting the plastic retainer (see illustration 20.6).
8. Unscrew the three bolts from the lock with a T30 screwdriver and remove the lock (see illustration).
20.8 Unscrew the three bolts from the lock with a T30 screwdriver and remove the lock
9. Disconnect the plug of the central lock from the lock, if one is installed.
Installation
10. Put the door lock in place and secure with bolts.
11. Connect the plug of the central lock to the lock.
12. Fasten the rod of the lock release button to the lock.
13. Insert the switch of the lock and fix it with a lock ring.
14. Install the cover of the anti-theft system unit and fix it with bolts.
15. Install the side impact converter and door trim.