Front door
Removing
1. Remove glass.
Attention! The manual window regulator is removed in the same way as the electric one. Below is the procedure for removing the power window.
2. Disconnect the power plug of the power window motor.
3. Unscrew bolts And fastenings of the electric motor of a window regulator (see illustration).
22.3 Unscrew the bolts A of the power window motor
4. Unscrew the bolts B fastening the glass (see illustration 22.3).
5. Tilt the power window mechanism and remove it through the opening in the door.
Installation
Attention! After installation, window adjustment is not required.
6. Get window regulator in an aperture on a door and fix it with bolts.
7. Bolt the power window motor and connect the power plug to it.
8. Replace the glass.
Backdoor
Removing
9. Remove glass of a door.
10. Remove the power window handle by unscrewing the fastening screw A (see illustration).
22.10 Remove the power window handle by unscrewing the fastening screw A
11. Unscrew the bolt B of the glass support in the power window (see illustration 22.10).
12. Tilt the window lifter mechanism and remove it through the opening on the door.
Installation
13. Get window regulator in an aperture on a door and fix it with bolts.
14. Replace the glass.