Removing
1. Remove the door upholstery.
2. Front door. Remove the side impact converter.
3. Disconnect from the external handle of a door draft 1 (see illustration).
19.3 Disconnect the rod 1 from the outer door handle
4. Rear side door. Remove both plugs B of the bolt heads by prying them with a narrow screwdriver (see illustration).
19.4 Remove both caps B of the bolt heads by prying them out with a narrow screwdriver. Rear side door
5. Unscrew bolts And fastenings of the external handle of a door (see illustration).
19.5 Unscrew the bolts A fastening the outer door handle
6. Pull up on the handle to lift it up and remove (see illustration).
19.6 Pull the handle upwards and remove
Installation
7. Put the handle in place and secure with bolts.
8. Attach a pull rod to the handle (see illustration 19.3).
9. Back door. Close the holes for the handle mounting bolts with plugs.
10. Install the impact transducer (front door), as well as door trim.