Removal the differential (Renault Fluence 1)

To remove the sealing ring, tap the sealing cuff with a punch with a thin cylindrical end and a hammer. This is necessary to turn it.

Remove the sealing ring, being careful not to damage the splines of the planetary gear.

To obtain support when working with the press, place a plate under the driven gear. To release and remove the snap ring A, push it towards the clutch housing.

To obtain support when working with the press, place a plate under the driven gear. To release and…

The differential is removed by pressing hard on the planetary gear.

Source is located on the website RENAULTBOOK

This article is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article has been reviewed by editor: Podkrepilov Maxim

Share with friends:

Fluence 1: Mechanical gearbox

Adjusting the axial clearance of the secondary shaft bearings
Adjusting the secondary shaft bearing pre-tension
Replacing the bearing on the clutch housing side
Replacing the primary shaft bearings
Replacing bearings on the clutch housing side

Replacing bearings (gear side)
From the planetary gear side
Control axis and shaft installation