Disconnect the battery.
Remove:
- right front wheel;
- right front fender.
Disconnect connector (1) ECU for automatic transmission.
Remove:
- automatic transmission computer mounting nuts (2);
- ECU automatic transmission (3).
Install the parts in reverse order.
Note. If the automatic transmission computer is replaced, it is necessary to enter into the memory of the new computer the value of the service life of the working fluid in the gearbox, stored in the memory of the replaced computer.
Read out the fluid life data in the replacement control unit using parameter PR 133 «Odometer until next fluid change» and write them down.
Replace ECU.
Enter the fluid life data into the memory of the new ECU using the command: CF320 «Migrate odometer data until next fluid change».
Check data entry by parameter output «trip counter until next fluid change». Carry out a road test to memorize the entered parameters with the new ECU.