Tailgate lock
Loosen the tailgate lock bolts (1).
Disconnect connector (2). Remove the tailgate lock (3).
At installation tighten bolts of fastening of the lock of a back door of 8 Nm by the demanded moment.
Remove tailgate wiring harness (5) and tailgate stops (6).
Remove the rear window wiper arm.
Rear wiper motor
Turn the wiper switch from position (ABOUT) into position (1), then from the position (1) into position (0).
Disconnect connector (1) rear window wiper motor. Remove the rivets (2) rear window wiper motor mounts.
Tailgate lock switch
Remove the trunk lock switch with a small flat-blade screwdriver while pressing the latches (1). Disconnect the tailgate open switch connector.
Upper brake light
Loosen the fixing screws (1) top stop light.
Remove the upper brake light at the point (3), by pressing the clamps (2).
In case of replacement, disconnect the rear window washer jet by pressing the latches (4).