In the version for some countries, the switching on of the daytime running lights is controlled by the central electronic switching unit (CEKB).
In addition, there are special jumpers in the fuse and relay box for supplying power to the exterior light switch and direction indicators.
Set jumpers A to enable or disable this feature.
Configure the UCH using the diagnostic tools using the menu «Teams», «System Configuration» and selecting the line with «daytime running lights» or without them.
Install the relay in an additional fuse and relay box (depending on version, check wiring).
To install the daytime running lamp relay, remove the inner cover of the glove box, which is secured with one screw.
Mount the two special relays on holders B. Ensure that the wiring is present and refer to the relevant wiring diagram.