Removing
Remove the gearbox.
Lock the flywheel with a latch (1).
Remove:
- clutch mounting bolts (2),
- clutch cover,
- clutch disc.
Installation
Replace defective parts.
Wipe with surface cleaner:
- flywheel surface for clutch disc
- splines of the input shaft of the box.
Attention! Do not lubricate the gearbox input shaft splines.
Install the clutch disc.
Center the driven disc using the tool (3).
Alternately wrap bolts of fastening of a casing of coupling crosswise.
Torque tighten the clutch cover mounting bolts (15 Nm), gradually tightening them with a cross tightening.
Remove the fixture.
Install the gearbox.