Puncture
In the event of a tire puncture, depending on the vehicle equipment, you can use: a spare wheel or a tire inflation kit (see next pages).
Spare wheel, 4X2 modification (2WD)
It is located in holder 4 under the bottom of the vehicle.
To get a spare wheel:
- open the tailgate;
- unscrew screw 1 with wheel wrench 2, see section «Tools»;
- unhook the holder, taking it by the handle 5;
- remove spare wheel 3; turn over the spare wheel and disconnect the protective shield 6 from the latches.
In the event of a tire puncture, depending on the vehicle equipment, you can use: a spare wheel or a tire inflation kit (see next pages).
If the spare wheel has been stored for several years, take it to a service station mechanic to check that the wheel is suitable for safe use.
To install the wheel in the holder:
- fasten the protective shield 6 on the punctured wheel with clips:
- turn the punctured wheel over and insert it into holder 4;
- attach the holder, helping yourself with the handle 5. and tighten the screw with the wheel wrench 2 to raise the entire assembly;
- check the reliability of its fixation.
Spare wheel modification 4X4 (4WD)
The wheel is located in the luggage compartment.
To get it:
- open the tailgate;
- remove the luggage cover 7 or fold it completely;
- lean the luggage compartment mat 8 vertically against the back of the rear seat or the folded luggage compartment shelf;
- turn out the central fastening 9;
- remove the spare wheel 10.