Removal
When replacing the instrument cluster, read the mileage counter indications on the instrument cluster and record them in the service book.
Turn off the ignition.
Unscrew the two lower mounting screws (1).
Disconnect:
- lower steering column trim cover in the direction of the arrow (2),
- upper steering column cover.
Remove the center trim (3) starting from the bottom.
Remove the trims (4).
Loosen the screws (5) securing the instrument panel beam.
Disconnect the instrument cluster frame at points (6) and (7).
 |
 |
Loosen the screws (8) securing the instrument panel.
Disconnect the instrument panel.
Disconnect the instrument cluster connectors.
Installation
Connect the instrument cluster connectors.
Secure the instrument panel with holders.
Tighten the instrument panel mounting bolts
Secure the instrument panel frame.
Tighten the instrument panel frame bolts.
Snap:
- cladding,
- central cladding.
- upper steering column cover,
- lower facing casing.
Tighten the two lower mounting bolts.
Post-repair check
Turn on the ignition.
Check the operation of the instrument panel.
Set the current time on the clock.