Helpful advice: When operating a vehicle in conditions of increased air dustiness (for example, in a large city) we recommend replacing the filter element more often - after 15 thousand km of mileage.
To replace the filter element of K7J and K7M engines, do the following.
You will need a Phillips-head screwdriver.
1. Lift up the air filter cover retainer bracket...
2. ...and unfasten the retainer.
3. Unfasten the remaining fasteners in the same way.
Note.
- The air filter cover is held in place by four clips.
4. Remove the five screws securing the air filter cover...
5. ...and take it off.
6. Remove the filter element from the filter housing.
7. Install the parts in the reverse order of removal.
To replace the filter element of the K4M engine, do the following.
You will need a TORX T25 key.
1. Unfasten the rubber clamp securing the air supply hose.
2. Disconnect the air supply hose from the air filter...
3. ...and remove the sleeve.
4. Remove the two air filter mounting screws.
5. Remove the filter element from the air filter housing.
6. Install the parts in the reverse order of removal.