- lower facing of an average rack;
- partially side door seals.
Detach the cladding by pressing the latches (1) screwdriver with a flat blade.
Remove decorative trim (2).
Remove the bolt (3) and remove the front seat belt guide.
Loosen the screw (4) and remove the front seat belt guide guide rod.
Use a flat blade screwdriver to press the point (7), to release the lower part of the cladding.
Remove holders (9).
Disconnect the bottom part of the top facing of an average rack.
Remove the upper lining of the middle pillar at the points (10) And (11).
Install the parts in reverse order.