Contents: Removal 🠛 Installation 🠛
Removal
1. Disconnect the negative cable from the battery.
2. Disconnect the wiring connector from the ignition module (see illustration).
5.2. Disconnect the wiring from the electronic ignition control unit - D-series engine.
3. Make sure the high tension wires are marked accordingly, then disconnect them from the spark plugs or from the ignition module.
4. Unscrew the four mounting bolts and remove the ignition module from the engine (see illustrations).
5.4a. Loosen the mounting bolts...
[Text published on the website www.RenaultBook.ru]
5.4b....and remove the ignition module - D-series engine.
Installation
5. Perform installation in reverse order, do not mix up the high voltage wires when connecting.