Main characteristics
| System type | Equipped with an amplifier; the brake hydraulic line is divided into two diagonal circuits |
| Front brakes | Disc with sliding caliper actuated by a single piston cylinder |
| Rear brakes | Drum or disc, depending on the model; equipped with an automatic gap compensator |
| Handbrake | Activates the rear brake pads via a cable |
Front brakes
| Disc diameter: All except models with F7P engine (with 16 valves) | 238 mm | |
| Models with F7P engine (with 16 valves) | 259 mm | |
| Disc thickness | New | Minimum |
| Models with C-series engines | 8.0 mm | 7.0 mm |
| Models with D and E series engines | 12.0 mm | 10.5 mm |
| Models with F-series engines | 20.0 mm | 18.0 mm |
| Disc runout (all models) | No more than 0.07 mm | |
| Minimum brake pad thickness (including metal base) | 6.0 mm | |
Rear drum brakes
| Drum diameter: New | 180.25 mm |
| Maximum diameter after resharpening | 181.25 mm |
| Brake pad thickness (including metal base): New | 6.5 mm |
| Minimum | 2.5 mm |
Rear disc brakes
| Disc diameter | 238 mm |
| Disc thickness: New | 8.0 mm |
| Minimum | 7.0 mm |
| Disc runout | No more than 0.07 mm |
| Minimum brake pad thickness (including metal base) | 5.0 mm |
ABS system
| Gap between wheel sensor and slip ring: Front wheel | 0.21 - 1.03 mm |
| Rear wheel | 0.40 - 1.50 mm |
| Sensor resistance | 1130 Ohm (approximately) |
Tightening torques Nm
| Vacuum booster unit mounting nuts | 23 |
| Brake hose coupling | 13 |
| Nuts securing the master cylinder to the booster | 23 |
| Master cylinder brake pipe connecting nuts | 13 |
| Bendix type front brake caliper mounting bolts | 100 |
| Girling type support: Guide pin bolts | 35 |
| Mounting bracket to steering knuckle | 100 |
| Rear brake caliper: Caliper mounting bolts | 100 |
| Caliper bracket mounting bolts | 65 |
| Rear wheel hub nut: Drum brakes | 160 |
| Disc brakes | 175 |
| ABS system components: Connecting nuts of the brake pipe of the modulator assembly | 12 -16 |
| Wheel speed sensor mounting bolts | 8 - 10 |
| Wheel bolts | 90 |
* Use new bolts