You will need: TORX T20 key, flat-blade screwdriver.
1. Disconnect the wire from the negative terminal of the battery.
2. Remove the two bolts connecting the upper and lower parts of the steering column cover.
3. Remove the top...
4. ...and the lower part of the casing.
5. Remove the transponder ring...
6. ...and disconnect the wiring harness connector from it.
7. Under the instrument panel there is a connector for the ignition switch wiring harness. Remove it from the holder by pressing the lock (shown by arrow).
8. Slide the lock in the direction shown by the arrow and disconnect the shoe.
9. Insert the key into the ignition switch and turn it a quarter turn clockwise (the mark on the ignition switch is between positions "A" and "M").
10. Remove the ignition switch (lock) wiring harness from the instrument panel.
Text published on the website: www.Renaultbook.ru
11. Unscrew the ignition switch (lock) mounting bolt.
12. Use a screwdriver to press the lock and remove the ignition switch (lock) from the housing.
13. Remove the ignition switch (lock) by pulling its wire harness out of the housing.
14. Install the parts in the reverse order of removal.