1. To remove the rear side passenger seat belt, unscrew the two screws securing the plastic trim to the vehicle body.
2. Remove the plastic trim and set it aside.
3. Remove the rear seat cushion (see subsection "Removal and installation the rear seat").
4. Remove the bolt securing the lower belt to the seat bracket.
5. Remove the mount...
6. ...and pass the lock and the lower fastener through the opening in the upholstery eyelet.
7. Remove the bolt securing the belt reel to the vehicle body...
8. ...and remove the rear side belt.
9. Remove the rear belt on the other side in the same way.
10. Install the parts in the reverse order of removal.
11. To remove the rear middle passenger seat belt, use a screwdriver to pry up the cap on the belt buckle mounting bolt located on the vehicle ceiling and remove the cap.
12. Remove the upper mounting bolt and detach the bracket from the body.
Note.
- The bolt has a spacer and spring washers installed, do not lose them.
13. Remove the bolt securing the belt guide to the body.
14. Remove the belt guide by releasing it from the body hole (shown by arrow).
15. Having folded back the felt upholstery of the body, unscrew the bolt securing the reel of the rear middle passenger seat belt to the car body.
16. Remove the reel and belt.
17. Install the parts in the reverse order of removal.