Removing
1. Disconnect the clutch cable from the clutch release fork.
2. Depress the clutch pedal and hold it in this position. This will pull the cable.
3. Disconnect the end of the cable from segment S of the adjuster and from ring A on the toothed cam (see illustration).
5.3 Disconnect the end of the cable from segment S of the adjustment device and from ring A on the toothed cam
4. Use a screwdriver to release the cable sheath from the mount on the bottom.
5. Pull the cable out of the engine compartment and remove it.
Installation
6. Get the clutch cable into the passenger compartment, operating from the engine compartment.
7. Attach the end of the cable to the toothed segment and guide the cable into the groove of the cam.
8. Lubricate the tooth connection of the S segment and the cam With universal grease (see illustration 5.3).
9. Attach the other end of the cable to the clutch release fork.
10. Depress the clutch pedal. The cable tension will be adjusted automatically.