Removal and installation the starter (Renault Sandero 1)

The starter is mounted on the clutch housing on the rear side of the power unit.

You will need: keys "8", "13".

1. Disconnect the wire from the negative terminal of the battery.



2. Unscrew the control wire fastening nut and disconnect the wire from the traction relay.



3. Unscrew the power cable fastening nut...

(This note was copied from the resource: «RenaultBook.ru»)



4. ...and remove the wire from the contact bolt of the traction relay.





5. Remove the three mounting bolts...



6. ...and remove the starter.

7. Install the starter in the reverse order of removal.