1. Disconnect the wire from the negative terminal of the battery.
2. Remove the front bumper (see "Removal and installation the front bumper").
3. Remove the protective cover from the headlight corrector.
4. Remove the corrector drive cable from the holder...
5. ...and disconnect it from the headlight range control.
6. Remove the bolt securing the headlight to the wing mounting bracket.
7. Remove the upper headlight mounting bolt.
8. Remove the rear lower headlight mounting bolt.
9. Disconnect the turn signal wire connector from the socket.
10. Disconnect the wire connector from the headlight bulb.
11. Turn the parking light bulb socket 90° clockwise (for the left headlight - counterclockwise)...
12. ...and remove it.
13. Remove the headlight unit.
14. Install the parts in the reverse order of removal and check that the headlights are adjusted correctly (see "Headlight adjustment").