1 - Button;
2 - Display.
The current time is displayed on display 2 when the ignition is switched on.
Time setting
- slightly turn button 1 to the right;
- set the current time by pressing or holding button 1;
- slightly turn button 1 to the right;
- set the tens of minutes by pressing or holding button 1;
- slightly turn button 1 to the right;
- set the minute units by pressing or holding button 1;
- slightly turn button 1 to the right to confirm the hour setting.
Attention! When power is off (when the battery is disconnected, wire break, etc.) the time displayed by the clock is lost.
Display 3 - time setting. Use buttons:
H - to set the clock;
M - to set the minutes.