Removing
1. Open the hood. Depress the two clamps G and remove the filter for cleaning the air entering the passenger compartment (see illustration).
14.1 Depress the two clamps G and remove the filter for cleaning the air entering the passenger compartment
2. Lift the cover at end H and remove it (see illustration).
14.2 Lift the cover at end H and remove it
3. Remove the cabin air filter by pulling on the foam pad (see illustration).
14.3 Remove the cabin air filter by pulling on the foam pad
Installation
4. Insert the filter into place and close the lid, which should lock into place.
5. Replace the intake filter grille and fix it with clips G (see illustration 14.1).
SCENIC cars
Removing
6. Unscrew bolt C (see illustration) and remove the cover by pushing in the direction of the arrow in the illustration.
14.6 Unscrew bolt C and remove the cover by pushing in the direction of the arrow
7. Remove the cabin filter 1 from the housing, in the direction of the arrow in the illustration, pulling the foam seal (see illustration).
14.7 Remove the cabin filter 1 from the housing, in the direction of the arrow in the illustration, by pulling the foam seal
8. Mark the mounting position of the filter to correctly install the new one.
Installation
9. Position the new filter properly and push it fully into the housing.
10. Replace the filter cover in the opposite direction of removal (see illustration 14.6).
11. Screw in the mounting bolt.