Contents: Removal 🠛 Installation 🠛
Removal
64. Disconnect the fuel hose holder (see illustration).
16.64 Disconnect the fuel hose holder
65. First loosen bolt A and then loosen bolt B until the flange protrudes, holding the belt tensioner with a 9 mm square wrench. Then turn the wrench in the direction shown by the arrow in the illustration and remove the belt.
16.65 First unscrew bolt A and then bolt B until the flange protrudes, holding the belt tensioner with a 9 mm square wrench
66. Remove the right wheel arch liner.
67. Unscrew the generator mounting bolts and remove it.
Installation
68. Place the generator in place and secure it with bolts.
69. Install the new V-belt and tighten it.
70. Connect the large diameter wire (terminal B+) to the generator terminal. The thin section wire (terminal D+) is connected to the connector.
71. Install the mudguard liner.
72. Connect the negative (-) wire terminal to the battery terminal.
73. Set the clock and program the radio to receive radio stations.