Removing
1. Open the trunk lid and unscrew the lining on the inside of the lid, which prevents access to the taillight.
2. Disconnect the plug A. If necessary, remove the base plate of the bulbs by squeezing the leashes C of the base plate (see illustration).
27.2 Disconnect plug A. If necessary, remove the light bulb support plate by squeezing the leashes C of the plate holder
3. Unscrew nuts B and remove the headlight lens by pressing it from the inside (see illustration 27.2).
For vehicles with a body «coupe» The headlight lens is secured with four nuts.
Installation
4. Check up a condition of a sealing lining of a headlight. Replace gasket if necessary.
5. Install the headlight lens in place and secure with nuts.
6. Replace the bulb base plate and trim.