Contents: A - Turning on the security alarm 🠛 B - Turning off the security alarm 🠛 C - Siren with autonomous power…🠛
Availability depends on vehicle configuration or country of delivery.
Your car is equipped with a security alarm system that performs the following functions:
- Ultrasonic control of the car interior volume
- Perimeter control of the salon
- Monitoring the perimeter of the trunk and hood of the car
A - Turning on the security alarm
Before turning on the alarm, check:
- are the door windows and the roof vent closed? (if there is a hatch);
- whether there are passengers, animals or objects in the cabin that could move and trigger the alarm.
The alarm is activated when the doors are locked using the remote control. A short sound signal confirms that the alarm is activated. Some vehicles are equipped with an indicator that the alarm is activated by double flashing of the hazard warning lights and by turning on the indicator lamp 1, which is located on the upper panel in front of the interior rear-view mirror.
If the security alarm does not turn on when the doors are locked: use key 2 to unlock safety switch 3, located in the glove compartment.
Warning! If the hazard warning lights do not flash when the alarm is armed, this indicates that the trunk lid, hood or one of the doors is open (or not closed tightly) and the perimeter control function is disabled (the volume control function remains enabled in this case). When all doors, trunk lid and hood are securely closed, the hazard warning lights will flash to indicate that the perimeter monitoring function is activated,
Opening the trunk, hood or one of the doors will cause the alarm to be immediately activated. For some time after the alarm is activated, the control lamp will light, indicating that the ultrasonic field inside the car is stabilizing. After the ultrasonic field has fully stabilized, the control lamp will switch to flashing mode. Now, if someone tries to break into the car, the alarm will be activated.
Attention! Due to possible battery discharge, the security alarm may be continuously activated for a period not exceeding five weeks.
B - Turning off the security alarm
Even if the security alarm is triggered, it will be deactivated when the doors are unlocked using the remote control.
When the security alarm is turned off, the hazard warning lights flash.
Warning! The alarm system is not switched off when the doors are unlocked with the key. To switch off the alarm system, use the remote control or key 2. Switch 3 is located in the glove compartment.
C - Siren with autonomous power supply
When performing any maintenance or repair work on the vehicle's electrical equipment, or if the electrical fuse of the security alarm burns out, you must first turn off the autonomous siren. The siren can be turned off in two ways:
- unlocking the door locks using the remote control:
- by turning the key 2 inserted in switch 3 to the "OFF" position.
To bring the siren with autonomous power supply into working condition, it is necessary to make a trip by car for at least 3.5 hours to charge the built-in battery, which in this case will be able to provide one full cycle of the security alarm.
Recommendation: After completing maintenance or repair work on electrical equipment, make sure that the autonomous siren is turned on. This is indicated by a short sound signal that sounds each time the doors are locked using the remote control.